Innovative Electronics for Automation and Motion Control

Electromen Oy Ltd has been designing and manufacturing high-quality electronic control solutions since 1988. With decades of experience and hundreds of successful development projects, we specialize in DC and BLDC motor controllers, custom electronics design, and OEM production for demanding automation and motion applications.

Our mission is to provide reliable, flexible, and cost-effective control solutions — from standard controllers to fully customized designs — tailored to your specific needs. Driven by technology, trusted by professionals.

Easy Ordering – From Single Units to Large Batches

All Electromen products are available directly from our online store – fast delivery from our own warehouse.
Order easily whether you need one piece or a full production batch.
For B2B customers, we offer tailored pricing, scheduled deliveries, and long-term supply agreements.
Larger orders can also be handled through our official representatives and distributors — their contact details can be found on this website.

Electromen – Electronics for Automation, Designed and Made in Finland.

Highlighted products

EM-180A DC-Motor Starter

Fast change of direction
Soft start-up, acceleration ramp
Settable current limit
Trip or continuous current limit
Low RF emissions ( EMC )
Low idle current ( sleep mode option )
Continuous or impulse mode control
NPN or PNP control possibility
EM-180A replaces EM-180

Stock: 247 pcs.

EM-185A DC-Motor Speed Regulator

1-quadrant
Panel mountable
Motor size 5-80W
Good speed regulation
Load comp. adjustable RxI
EMC tested (CE marked)

Stock: 466 pcs.

EM-241C DC-Motor Controller

Basic driver for logic and speed control
Motor up to120W@12V/ 200W@24V
current limit
Start and Stop ramps
speed setting
flexible control inputs
impulse / continuous mode
rail base mountable
digital parameter setting

Stock: 1202 pcs.

EM-241B-PLI DC-Motor Controller

for motor with 2 pulse output
End limits based on pulse counter
current limit
recommended max. motor size
120W@12V and 200W@24V
speed setting
Several enclosure options
digital parameter setting
APPLICATIONS
hatch and gate opener
actuator stroke, force and speed adjust

Stock: 262 pcs.

EM-247C DC Motor Controller

basic driver for logic and speed control
0.7kW@12V, 1kW@24V
current ( torque ) limit
adjustable start or stop ramps
flexible control inputs
brake output, magn. or res.
impulse / continuos mode
digital parameter setting
APPLICATION
small vehicles
lifters and conveyor
actuators torque limit

EM-262A Power Controller

Triac, phase angle controller
50...700W, suitable loads: resistor, fan motor and transformer
Base level adjustment
0...5V, 0...10V or 4...20mA control
Aux. voltage for potentiometer use
Galvanic isolation
Rail base mountable

Stock: 115 pcs.

EM-269A Brushless Driver

Only motor with hall sensors
Basic driver

Stock: 285 pcs.

EM-282D DC-Motor Controller with Modbus RS485

EM-282D DC-Motor Controller
EM-282D DC-MOTOR CONTROLLER 12-48V , 100A - 80A
basic driver
for motors up to 1.5kW@24-48V
high current output
brake load output
current limit & start and stop ramps
current limit for brake also
speed setting/adjustment
flexible control inputs
impulse / continuous mode
rail base mountable
digital parameter setting
C versions program
added Rs-485 bus

EM-285 Speed Regulator

Speed cont. to 1-direction
Panel mountable
Small size
Motor size 30-200W
Good speed regulation
Load comp. adjustable RxI
Adjustable current limit
Overheating protection
EMC tested.

Stock: 273 pcs.

EM-295C DC-Motor Controller

DC motor speed controller, one direction
Recom, motors up to 200W@12V, 300W@24V and 400W@48V
Regenerative braking
Braking resistor or Magnetic brake control output
Voltage stabilized and RxI load compensation

Stock: 274 pcs.

EM-314A Stepper Controller with Modbus RS485

Bibolar chopper
1, 1/2 , 1/4.....1/64 steps
Four preset function inputs
PNP or TTL control
Quiet run current control
Acceleration / deceleration ramps
Low EMC emissions
Also available with Molex connector
DIN-rail base mountable
Analog speed control input
Modbus control option

EM-324C DC-Motor Controller

current limit
speed setting
NPN/PNP control inputs
impulse / continuous mode
2KHz or 16kHz pwm frequency
digital parameter setting
Molex connector option available
EMC Tested, Industrial and house hold

Stock: 451 pcs.

EM-337A-PLI Parallel Driver with Modbus RS485

12 - 24V, 4 x 10A

synchronized 4 parallel driving
operates with pulse feedback
2 pulse line/ motor
quadrature pulse counting
current and temperature limit
settable drive speed
acceleration and deceleration ramps
range limitations
digital parameter setting
brake ( release ) output
safety switch input
Rs-485 ( Modbus ) control
safety reverse function
APPLICATIONS
table lifter
hatch control
worktop control
actuator control

EM-339A-PLI Parallel Driver with Modbus RS485

12 - 35V, 2x 10A

synchronized parallel driving
operates with 2ch pulse feedback
quadrature pulse counting
current and temperature limit
acceleration and deceleration ramps
range limitation
digital parameter setting
brake ( release ) output
safety switch input
safety reverse function
APPLICATIONS
For Table lifter and Door and Hatch control
Synchronous Actuator or Pilar control

Stock: 285 pcs.

EM-347B Brushless Motor Driver with Modbus RS-485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

Stock: -44 pcs.

EM-352 Brushless DC-motor Driver with Modbus RS485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

EM-356C Brushless DC-motor driver with Modbus RS485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

Stock: 135 pcs.

EM-362D DC-Motor Controller with Modbus RS485

EM-362D is a full bridge DC-motor starter. It is designed to work with low voltage DC-motors (permanent magnet and brushed) in applications where a va...

EM-A24C DC Motor Driver

10 - 35V, 12A see details

EM-A24 is a DC-motor driver module.
It's based on EM-241 driver card.
This module is PCB mountable at vertical mounting

Stock: 1240 pcs.

EM-A43 Brake Resistor

Operating voltage 12-60V
Idle current 5mA
Switch on limit 20-60V adjustable
Switch on current typically 10-20A
Brake load 1.4 / 5.6ohm.
Overtemp limit 160 °C

EM-366A-SBL BRUSHLESS DC-MOTOR DRIVER POSITIONING and MODBUS

12 - 48V, 30-25A

For motor with hall sensor
Max. motor recom. 200W@12V, 400W@48V
Speed and torgue adjustment
Analog or Rs-485 Modbus control
Servo amplifier for positioning
Regenerative braking option
Position counter 31bit
True 4Q-power stage
Braking resistor output
Fan control output
Current limit and trip
Low EMC emissions
DIN-rail mountable

EM-366A Brushless DC-Motor Driver with Modbus RS-485

12 -48V, 30-25A

Only for motors with Hall sensors
Speed and torgue adjustment
Open/closed loop modes
Regenerative braking option
Braking resistor output
Fan control output
For motors up to 200W @12V
300W @ 24V and 400W @ 48V
Current limit and trip
Indication output option
Good efficiency
Low EMC emissions
DIN-rail mountable

AAA - credit rating

ISO-certified suppliers and subcontractors

100% Finnish production chain

Device design, programming, and laboratory testing

Short delivery time

Our website uses cookies to enhance user experience. You can adjust your preferences from the settings

Cart

Overall:

0,00€

Move to register